Urban | Rustic | Industrial
These DIY industrial pipe shelves are EVERYTHING! Whether you are looking to fill an empty wall, create a fun storage option, add rustic charm to a kitchen, office or family room, these industrial pipe shelves will add a modern urban-farmhouse vibe to your space! And, instead of spending thousands of dollars with the pre-made versions you can build them yourself for a fraction of the cost. Follow my step by step tutorial to make your own DIY industrial pipe shelves!
DIY Pipe Shelf UPDATE
After about two years enjoying our beautiful DIY Pipe Shelves I decided it was time for an update. Originally we wanted to complete the project as cheaply as possible and that was the main reason we decided to go with the inexpensive 1″ boards. Fast forward to this fall when Julie found Delirious By Design! She fell in love with their pipe shelves and decided to use them in her bathroom redesign. I immediately started to picture how amazing our pipe shelves would look if we replaced the boards with their beautiful hand finished wood.
The very exciting news is that you can save 10% when you use our affiliate link HERE:
(Don’t forget to click on the pink “GET ACCESS” box to unlock your 10% savings code.)
Depending on the size of the shelf you want to create, your costs and time allotment are going to vary. For a reference point, here are the stats for the industrial pipe shelves we built:
Industrial Pipe Shelves Stats:
Time: One Weekend:
- The first day we made the plan, bought the supplies and put the first coat of stain on.
- The second day we put the second coat of stain, assembled the pieces and put them up on the wall.
If you count the amount of time it took me to research the project and then CONVINCE my hubbie to do this with me the total time involved would be over 6 months!! But, in the end we made these for about $350 and had them completed and ready for styling within two days.
We made the measurements, drew out a plan (including labeled picture with measurements) and made a detailed list of supplies. Then we headed to the hardware store. Actually, to be totally honest, my husband made 8 trips to the hardware store(s) looking for all the pipe pieces we needed, and to exchange a few pieces we got wrong. Tip, do not let your kids pic out the pipe pieces. You will need to double check the shapes and sizes because they aren’t always in the correct box! And finally, I did the first coat of stain so it could dry over night (this step is optional).
Day two we save for the “good stuff.” We put on the final coat of stain, assembled the pieces, and put them up on the wall.
Decide on your DESIGN.
- What do you want your shelves to look like?
- Do you want it “floating” on the wall (like ours)?
- Perhaps you want it hanging from the ceiling?
- Or, do want it connected to the floor?
For simplicity, we decided to go with “floating.” My hubby didn’t like the idea of making holes in the ceiling nor did he feel like cutting into the carpet. Honestly, at this point, I was just trying to keep him happy and focused so we could get this project done!
Next, decide on the SIZE.
- Measure your space and find your studs.
- Most studs are 18″ apart so this is where your brackets will go. You should use a stud finder or double check just to make sure. You don’t want to plan your whole shelf unit only to find out it can’t go where you want.
- If you are making a smaller shelf and do not plan to put anything heavy on it you could manage to hang it without attaching it to the studs (you should have seen my hubby cringe when I asked him about this). But, while he probably wouldn’t risk it, he did say it would be possible to use sheet-rock anchors to attach it. However, with a large shelf like the one we made this wouldn’t be a good idea.
- Start to map out what you have space for and what will look good.
Here is when you decide whether you want 2 or 3 support brackets. I thought the hubby was going for over kill when he suggested 3 support brackets. I had seen a great design on Pinterest that had only 2 support brackets and it looked awesome! But he was worried it would not have enough support with just 2. Remember….I was trying to keep him happy so of course I let him win! Here’s the deal….I hate to say it but he was right. Mostly because we were trying to cut costs and bought the cheapest boards sold at the hardware store. If we had used only 2 brackets these boards would have bowed under the weight.
Look and Function of your Industrial Pipe Shelves
So…..decide the look and the function of what you want to make. If you want to create a media center, for example, and are going for some amount of symmetry then you really want to go with 2 brackets. In this case you will want to plan ahead and buy stronger, harder (read: more expensive) boards!
Decide how many shelves you want and then count up the number of boards you will need. We wanted one shelve in the center that we could use for bigger items so we counted one fewer boards. I’ve seen one with no board on the very top and this is a good look, especially if you are putting your shelf close to the ceiling you might want to leave it off so you have at least one shelf with more space for bigger items.
Finally, decide what kind of FINISH you want on your pipes.
- Galvanized is more of a plain silver finish. This finish is specifically made to withstand rust and is more expensive.
- The black finish is cheaper but may be harder to find in the quantities needed (and thus the multiple hardware store runaround). And, warning, it’s kinda messy to work with. It is covered with oil so you will need to wash these. Even so the black will continue to come off on your hands.
- I’ve heard of people using spray paint to make their pipes look more uniform. Note: Some galvanized are treated with a special coating and you may have trouble getting the spray paint to stick. Before you go crazy with this idea I would test it out.
Based on your above decisions start making your shopping list!
Our Shopping List
To build our shelf unit of 5 shelves, 6 rungs and 3 support brackets this is what we used:
You may click on the picture for direct shopping links. We have included these affiliate links for your shopping convenience. We understand that you have lots of options when you shop. When you choose to shop with us it helps support our blog and we appreciate it!!
Quart size can of Stain. I used Dark Walnut by Minwax. (optional)
Step-By-Step to build your Industrial Pipe Shelves
- Assemble one bracket at a time and lay out on the floor.
- Be very sure to line up every fixture so they are exactly in line with one another. This is essential or you will end up with a wavy shelf!!
- Hold assembled unit against the wall at pre-measured location (this should line up with the studs). This is when 4 hands are really useful–ok, ESSENTIAL!
- Use a balance to ensure it is straight and mark the walls for the screw anchors.
- After inserting anchors, align unit and screw in place.
Repeat steps 1-5 and put up second support bracket the same way!
And the 3rd support bracket.
Hopefully your boards are dry and you can put them up right away!
Then comes the fun part! Decorating them. My hubby was laughing at me. When the boards were finally dry (the next morning) I was literally running around the house gathering up decor from every room of the house, and I hadn’t even had my coffee yet!
Every season I have had fun changing up the decor.
This is a summer decor version of my shelf. I really wanted more white accents. And the pop of natural green felt very fresh.
This was my fall decor update. It’s the only place in the house I used any orange. But these industrial pipe shelves are like a decor entity all to themselves. They get special treatment!
And the funniest part about this project? My hubby loves them at LEAST as much as I do! Go figure!!
* This article contains affiliate links.